Aviation Renewables was tasked with the supply, training and commissioning of a portable LED runway lighting system for an International Airport located in the Caribbean. The entire portable LED runway lighting system solution is stored, transported and charged in the civilian designed mobile trailer. The airport is able to transport the equipment to any location within the air eld within minutes notice as a contingency on demand system, ready for quick deployment in the case of a power failure to the main runway lighting system or unforeseen circumstances such as a displaced threshold or natural disaster.

Aviation Renewables in partnership with Flight Light Inc. and JSF Technologies, has supplied a total of 39 Solar Series Elevated Runway Guard Lights (ERGL) to a US Air Base, in support of USAF airfield operations. The Solar Series ERGL is a self-contained, self-charging, power free, cost efficient solution, requiring minimal installation and maintenance. The Solar Series ERGL offers a quick and effective solution to airfields, in support of efforts to prevent unnecessary runway incursions and over-all airfield safety.

Aviation Renewables was tasked with the design, installation, training and commisioning of an LED airfield lighting system at a private civil airport in Lao PDR. The system features a Solar Series LED PAPI systems, LED runway edge and threshold lighting to enable safe night landings.

Aviation Renewables designed and oversaw the installation of a solar LED airfield lighting system in the Caribbean. The system features Solar Series LED airfield lighting solutions. With an urgent need to be operational, the entire system was installed and operational in less than 3 weeks time at a fraction of the cost compared to a conventional system.

Aviation Renewables designed, supplied and installed the Solar Series LED PAPI powered by its MAPPS solar power system at a remote airport in Southeast Asia. Aviation Renewables was able to deliver and install the system within 4 weeks of purchase order, meeting the client's deadlines for funding. As a remote, off-grid location high in the mountains, the airport faced a challenge to provide adequate vertical guidance for the challenging mountainous approach. 

Aviation Renewables designed and oversaw the installation of solar powered LED Wind Cones for an airport in the Caribbean. The system features Solar Series LED Wind Cones operating with a solar LED runway lighting system via a hand held radio controller. With an urgent need to be operational, the wind cones were installed in a single day with the solar runway lighting system installed and operational in less than 3 weeks time at a fraction of the cost compared to a conventional system.

Aviation Renewables was tasked with the design of a solar airfield lighting system for the extension of the runway at the International Airport, located in South America. The solar airfield lighting system features advanced LED lighting and power solutions that operate from a remote command and control system.

Aviation Renewables designed and delivered installation training for the Solar Series NDB powered by the Solar Series MAPPS system for an AC Non Directional Beacon with back up generator to provide 24/7continuous operations for the Department of Civil Aviation Operation in Southeast Africa.

Aviation Renewables consulted in the design of a complete Solar Series LED Hold Position flashing beacon system for Toronto Pearson International Airport (TPIA), Canada’s largest international airport. The Solar Series LED Hold Position Light features a 24/7 warning beacon mounted on top of stop signs located throughout the airfield, providing safety operations for both day and night.