FAQ - PORTABLE AIRFIELD LIGHTING
What is the application of the portable LIGHTING? Where is the aerodrome located,
if there is the case?
The 1200 series RELM is designed to fit most edge lights made by most manufacturers. There are three different attachment methods to ensure the RELM will fit on your particular light. See graphic bottom right.
DO YOU NEED THE LIGHTS BE ICAO or faa COMPATIBLE? Do you need low or medium intensity?
The lifetime of the sleeve is directly proportional to the climate it is used. The sleeves are resistant to cold and to UV and can be expected to last 3-5 years in most climates. The sleeves can be quickly, easily and inexpensively replaced without removing the assembly from the edge light.
Will the operation be emergency only or for scheduled FLIGHTS? If so, how many flights per week, day and night?
How often would you use the lights.
Should the lights be radio or manually controlled?
No, the light fixture stays in place. With the flat bracket you would remove an existing base plate bolt and re-install incorporating the flat bracket. With the bent bracket you would only remove an existing set screw from the light and re-install incorporating the bent RELM bracket.
Is there a risk of theft or vandalism? In order to propose the correct mounting?
No, the light fixture stays in place. With the flat bracket you would remove an existing base plate bolt and re-install incorporating the flat bracket. With the bent bracket you would only remove an existing set screw from the light and re-install incorporating the bent RELM bracket.
wILL YOU like to mount the lights on the concrete or in the dirt?
No, the light fixture stays in place. With the flat bracket you would remove an existing base plate bolt and re-install incorporating the flat bracket. With the bent bracket you would only remove an existing set screw from the light and re-install incorporating the bent RELM bracket.