Here Comes The Sun – Asia Pacific Special Report

12 Aug Here Comes The Sun – Asia Pacific Special Report

Posted at 20:25h in News by aviation.renewables 0 Comments

0 Likes

A project by Aviation Renewables was recently featured in the 2015-2 issue of Air Traffic Management Magazine

Here comes to sun, demostrates how it is harnessing the sun as a primary power source to run a non directional beacon on a remote Mauritian island

Non directional beacons (NBD) are often located in extremly remote sites, and many do not have readly available AC power, it can unrealiable. Rather than exclusively using generators, which can be costly and maintenance-intensive, some municipalities are opting to use solar power as the primary power source with generators as backup.

No Comments

Sorry, the comment form is closed at this time.

Project Reports

Aviation Renewables Illuminates Eastern South American International Airport with Solar LED Runway Lighting
Victoria, BC – Aviation Renewables has been awarded a contract to provide self contained solar LED Runway Lighting at a South American International Airport. Since 2010, this busy international airport has been at the forefront of renewable power solutions by using off grid solar LED airfield lighting to illuminate its night operations. The ICAO compliant Solar LED Runway Lights supplied by Aviation Renewables are self-contained fixtures, harnessing the sun’s power to provide reliable, cost-effective illumination without the need for extensive cabling or trenching. The financial, maintenance and energy saving benefits of solar LED runway lighting are significant. With no energy bills, the airport is able to use the savings to invest in critical infrastructure or sustain ongoing operating budgets. In addition, the switch to solar LED airfield lighting has substantially decreased the airport’s carbon footprint, aligning with ICAO’s long-term aspirational goal (LTAG) of net-zero carbon dioxide (CO2) emissions from aviation by 2050. The durability and low maintenance of Solar LED Runway Lighting ensures uninterrupted operations, even in the face of power loss and natural disasters. With scheduled battery replacements, the airport benefits from a reliable LED airfield lighting system that is cost effective through the life cycle of the product. Aviation Renewables continues to support the international airport’s commitment to a low maintenance, clean energy and bright future. For more information on Aviation Renewables’ innovative solutions, visit their website https://aviationrenewables.com/. About Aviation Renewables Aviation Renewables is the leading integrator of solar-powered LED airfield lighting and helipad lighting solutions globally. With a focus on cost savings, operational efficiency and environmental benefits, the company delivers state-of-the-art technology to airports and heliports worldwide. Solar LED Runway Lighting Installed by Aviation Renewables
Solar LED Obstruction Lighting System Supplied for Dulles International Airport
Synopsis Aviation Renewables consulted in the design to provide a self-contained Solar Series LED Obstruction Lighting system for Dulles International Airport in Washington D.C., United Sates of America. The Solar Series LED L810 Obstruction Lights are mounted on top of the fence’s posts near the approach area of the airport, to increase the safety of flight operations. Challenge The Airport required help in finding a solar powered LED obstruction lighting system in order to reduce electrical and maintenance costs while providing a reliable and safe lighting system for flight operations. Aviation Renewables was tasked with helping in the design of a solar powered LED obstruction lighting system that would operate reliably year round, even in the event of severe weather storms and limited sunshine for months on end. Solution – Customized Solar LED Obstruction Lighting System The Solar Powered LED L810 obstruction lighting system is designed to meet the photometric requirements of an FAA L-810 and ICAO low intensity Type B light, and is typically used to mark towers and other obstructions for aerial and ground navigation. The system consists of a self-contained, solar-powered, steady-burning red LED light unit that can be easily installed on any structure without the need for external power supply or wiring. The system will be used to mark a fence near the approach area of Dulles International Airport, to increase the safety of flight operations. The solar power simplifies installation and is free to operate, reducing the environmental impact and operational costs of the airport. The all-in-one mounting solution combines a 20W solar panel, a controller and battery box and a light mount for the L-810 light. The unit is simply bolted to the fence post, and the battery connected. It will operate 24/7 for 5 years, at which point a simple battery replacement is the only maintenance required. The Solar Series LED L810 obstruction lights are designed to respond to and combat demanding environmental conditions. Already installed and operating worldwide, Solar Series solutions continue to be a reliable solution for off grid power and LED airfield lighting. View the complete Project Report and find more about LED Obstruction Lights here. L810 Obstruction Lights are Mounted on Top of the Fence’s Posts Near the Approach Area of the Airport L810 Obstruction Lights are Simply Bolted to the Fence Post to Operate 24/7 for 5 years
Solar Runway Lighting Illuminates Airstrip to ICAO and FAA Standards
Aviation Renewables has been awarded a contract to supply a remote airfield in South America with radio controlled solar runway lighting. The LED runway lighting project involves the supply of self-contained solar runway lights, a hand held radio controller and frangible stake mounts. The LED runway lighting is designed to provide reliable and cost-effective illumination for remote airstrips where electrical infrastructure is not available for day and nighttime runway operations. The new runway lighting features enhanced autonomy and battery performance, wireless radio control for command and monitoring capabilities, and a modular design that allows for maintenance free operation. Runway Lighting Installed and Ready to Operate Solar Runway Lighting Provides Reliable and Cost-Effective Illumination Solar Runway Lighting is ideal for remote, off-grid airstrips where infrastructure, electricity and electricians are not readily available. Installation of the solar runway lights can be accomplished within a day, eliminating the need for costly civil works, conduit, electrical cabling and electrical staff. The LED runway lighting is easily maintained with a simple 5 minute battery change within the airfield every 4-7 years. The LED runway lights collect solar radiation in order to recharge the battery each day, allowing the lights to operate day in and day out for on demand operations. Solar Lighting System Installed by Aviation Renewables at Remote Airstrip Aviation Renewables continues to lead the LED airfield lighting industry in the design, supply, installation, commissioning and support of global airports large and small with a focus to increase safety, reduce expenses and lower carbon emissions. For more information, please visit our Project Reports.
LED PAPI Supplied and Installed at Mine in Southeast Asia
Synopsis LED PAPI. Aviation Renewables supplied and installed a solar powered LED PAPI for a private runway in Southeast Asia. Aviation Renewables was able to retrofit a previously installed system, that was damaged during a severe flood, in order to keep the costs reasonable for the customer. Challenge The private industrial airstrip in Southeast Asia had previously installed Solar PAPI systems to aid pilots on approach. During a tropical storm, the entire airport was submerged in water up to 2 meters deep, which damaged the previous systems. Having made a significant investment in the equipment, the operator was eager to re-use any components that were salvageable. As the borders were closed during COVID, the installation of the new PAPI was significantly delayed which added to the challenge. Solution Aviation Renewables was contacted by the client, in order to help diagnose the components of the existing system. Using a combination of troubleshooting check-lists, WhatsApp calls and pictures, the on-site team was able to salvage components to create one operable system. Aviation Renewables then supplied an updated LED PAPI to replace the other approach end. As COVID significantly curtailed travel, the installation date was pushed until the borders reopened in mid-2022. Aviation Renewables’ installation team was able to make wiring modifications to the new PAPI in order to limit the number of excavations required for the retrofit. As a result, the existing wiring, conduit and concrete foundations were able to be re-used, which significantly reduced the installation cost for the client. The solar LED PAPI was installed over the course of 2 days and commissioned on the third day, and was well reviewed for visibility and accuracy on a flight check by the company chief pilot. View the complete Project Report and find more about LED PAPI Systems here. Solar Powered PAPI System in Operation Solar Powered PAPI Supplied and Installed by Aviation Renewables
Solar Runway Lighting and Reflective Signage installed at British Columbia Airport
Synopsis Solar Runway Lighting. Aviation Renewables was a awarded a contract for supply and installation of solar runway lighting, threshold lighting, turnpad lighting and retro-reflective airfield signs. The installation was conducted over two phases on a total of 8 nights. Being solar-powered, the lights require no trenching or cabling, and are easily activated as needed by the use of radio control. Challenge West Kootenay Regional Airport, in the interior mountains of British Columbia, has a challenging approach due to surrounding terrain. The airport can experience long periods of low cloud, which historically has impacted flight reliability. As a result, airport management has generated strategic initiatives to improve the approach minimums and conspicuity of the runway. As part of these initiatives, the addition of runway lighting was deemed essential to augment the existing approach lighting. In addition, the airport required a signage update in order to comply with new TP312 5th edition standards. Solution The airport released a competitive tender in the Spring of 2022, for supply and installation of runway edge lighting, threshold lighting, turnpad lighting and retro-reflective signage. Aviation Renewables was subsequently awarded the contract, and work commenced immediately on the detail design and product selection. Safety of operations is paramount in any construction activity, particularly construction activities that take place around active runways. For this reason, Aviation Renewables spent a great deal of time integrating the Site Safety Plan with the Plan of Construction Operations (PCO) that was created for the airport. This integration ensures that there is a clear understanding of the roles for all responsible persons involved in this project. During the PCO development, a determination was made that night work would be the safest option, enabling unfettered access to the runway edge. The separation of construction traffic and aircraft was accomplished by doing a full runway closure during night hours. Aviation Renewables trained all personnel and subcontractors involved in the construction on the unique challenges and procedures involved in airport work. These include site access, escort requirements, FOD control and grading specifications. As Castlegar is located in a mountain valley, the selection of a solar lighting product that would operate through the dark winter months was essential. Using data from NASA databases, detailed modelling of charge states throughout the year was created and used to select the AV426 runway edge light as the best performing light capable of Medium Intensity MIRLs lighting levels. The AV426 uses 4x 5-watt panels to charge a 288Wh battery. The light is modeled to support a minimum daily use of 6 hours throughout the year. here. As the airport has a single runway, it was imperative to maintain normal operations during the construction activity. The work was conducted during the overnight hours when the runway is normally closed. In addition, careful planning ensured that the work undertaken each night did not create hazards for the next day’s operations. These measures included: ensuring all open excavations were appropriately filled, graded and compacted each night; full FOD sweeps at the conclusion of each shift; and strict limits on vehicle traffic to ensure no mud or debris was tracked on runway and taxiway areas. The installation was conducted in two phases, on a total of 8 nights, including a layout survey and as-built survey. View the complete Project Report and find more about Solar Runway Lighting here. Solar Runway Lighting Installed by Aviation Renewables Reflective Signage Manufactured, Installed and Supplied by Aviation Renewables Solar Threshold Lighting from Aviation Renewables Operating at West Kootenay Regional Airport
LED Helipad Lighting System Installed & Commissioned in Africa
Synopsis LED Helipad Lighting. Aviation Renewables was awarded a contract to deliver, install and commission a solar powered LED Helicopter Approach Path Indicator and solar LED helipad lighting system to a customer in Central Africa. The system is designed to operate without the use of the grid power, making it a reliable cost-effective safety tool for the operation. Challenge The heliport operates in a coastal jungle area, which is subject to frequent showers and low visibility. During approach, there are several obstacles that must be avoided using proper glideslope. Being a remote site, access to electrical power is limited. As a result, they required a solar powered system that would operate without need for electrical inputs of any kind. The helipad operates with limited ground staff, necessitating the ability for the pilots to be able to activate and control the intensity of the lighting from the air. Solution Aviation Renewables delivered, installed and commissioned an off-grid, solar powered LED HAPI, windsock and solar TLOF lighting. The HAPI is powered by a self-contained solar power system that is mounted on frangible couplings. The 120W solar unit charges batteries containing 2.5kWh of storage, enabling the HAPI to operate for up to 8 hours per day. The Solar Series LED Wind Cone is installed adjacent to the helipad. It is a completely self-contained unit that mounts to a single mounting point, which eliminates any need for underground cabling or connections points which are a common point of failure. The windcone is powered by a 100W solar module, which will power the internally lit wind sock and obstruction light from dusk to dawn. The solar LED TLOF lighting is activated by a pilot activated radio controller, which allows the pilot to use the VHF radio in the cockpit to control the intensity of the lighting. The lighting is standalone and autonomous, requiring no connection to grid power or electrical wiring. Aviation Renewables was on site to lead the installation and commission the system. The entire system was installed and operational within 5 days. View the complete Project Report and find more about Solar LED Helipad Lighting here. LED Helipad System Installed and Commissioned by Aviation Renewables Solar Series LED HAPI System Installed by Aviation Renewables
LED PAPI Systems Powered by RMS Solar Engines Support Oceanic Civil Airports
Synopsis LED PAPI Systems. Aviation Renewables has been awarded a contract to design, integrate and deliver portable LED PAPI (Precision Approach Path Indicator) systems powered by Solar Series RMS engines with L854 Pilot Activated Lighting Control (PALC) for a South Pacific remote island airfield. Challenge The remote private airfield is situated in extremely mountainous terrain. The sudden changes associated with the mountain weather leads to low visibility conditions that can be a challenge to pilots on approach. In order to maintain proper attitude and approach slope, the airport decided a PAPI system would be the best tool. The airport has no grid electricity and no ground personnel, so they required a system that used off-grid electricity and would be remotely activated. Solution The private airfield tasked Aviation Renewables with designing a PAPI system that would use a well- designed, reliable solar power system and be activated by VHF radio from the cockpit. As the system is so remote, emphasis was placed on ease-of-use and reliability. The RMS solar power system features a compact, all- in-one design that keeps failure points to a minimum. The unit is mounted low to the ground on frangible mounts to comply with frangibility requirements. Each RMS will collect enough electricity from the sun each day to supply ten 15-minute activations. In emergency situations where more usage may be required, the battery will provide 12 hours of continuous use. The L854 Pilot Activated Lighting Controller is inte- grated into the PAPI Power Control Unit and maintains a passive listening watch on the aerodrome frequency. When the L854 detects 3, 5 or 7 clicks on the VHF frequency, the unit instructs the PAPI to illuminate in low, medium or high intensity, respectively. The Solar Series LED PAPI features industry-leading efficiency with FAA certified photometrics. The LED PAPI is extremely easy to install and re-locate, which will allow the client to re-deploy the system to another remote airport when the need arises. Aviation Renewables has supplied multiple solar powered LED PAPI systems to this region to support temporary, semi-permanent and portable LED runway lighting operations. Using these easily transported systems enables the airport operator to provide continuous, safe and ICAO compliant LED PAPI operations for jet traffic during periods of airfield construction, runway resurfacing projects or any unexpected events of power failure. View the complete Project Report and find more about LED PAPI Systems here. Solar LED PAPI Systems Designed and Delivered by Aviation Renewables

Here Comes The Sun – Asia Pacific Special Report

12 Aug Here Comes The Sun – Asia Pacific Special Report

No Comments

Contact Us

Latest News

Aviation Renewables Enhances Nighttime Operations at CJIA with Portable Runway Lighting

Aviation Renewables Illuminates Eastern South American International Airport with Solar LED Runway Lighting